Filter
Top Products
Monitor System Access and Performance
357
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
3. Click Apply to save your settings.
Note: Enabling routing and other event logs might generate a significant
volume of log messages. NETGEAR recommends that you enable
firewall logs for debugging purposes only.
To view the routing logs, system logs, and other event logs onscreen:
1. Select Monitoring
> Firewall Logs & E-mail. The Firewall Logs & E-mail screen
displays.
2. Click the V
iew Log option arrow in the upper right of the Firewall Logs & E-mail screen.
The View Log screen displays:
Enable SysLogs
Do you want
to enable
syslog?
To enable the VPN firewall to send logs to a specified syslog server, select the Yes radio
button. Complete the fields that are shown on the right side of the screen.
To prevent the logs from be
ing sent, select the No radio button, which is the default setting.
SysLog Server The IP address or FQDN of the syslog server.
SysLog Severity All the logs with a severity that is equal to and above the severity
th
at you specify are logged on the specified syslog server. For
example, if you select LOG_CRITICAL as the severity, then the
logs with the severities LOG_CRITICAL, LOG_ALERT, and
LOG_EMERG are logged.
Select one of the following syslog sever
ities from the drop-down
list:
• LOG DEBUG. De
bug-level messages.
• LO
G INFO. Informational messages.
• LOG NOTICE. There are normal but significant conditions.
• LOG W
ARNING. There are warning conditions.
• LOG ERROR.
There are error conditions.
• LOG CRITICAL. There are critical conditions.
• LO
G ALERT. An action has to be taken immediately.
• LOG EM
ERG. The VPN firewall is unusable.
Table 89. Firewall Logs & E-mail screen settings (continued)
Setting Description