Filter
Top Products
Virtual Private Networking Using SSL Connections
283
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv6, this screen is identical to the screen for IPv4 (see the next figure, which shows
some examples).
Figure 186.
4. Complete the settings as explained in the following table:
Table 72. Resources screen settings to edit a resource
Setting Description
Add Resource Addresses
Resource Name The unique identifier for the resource. You cannot modify the resource name
a
fter you have created it on the first Resources screen.
Service The SSL service that is assigned to the resource. You cannot modify the
service after you have assigned it to the resource on the first Resources
screen.
Object Type From the drop-down list, select one of the following options:
• IP Ad
dress. The object is an IPv4 or IPv6 address. You need to enter the IP
address or the FQDN in the IP Address / Name field.
• IP Ne
twork. The object is an IPv4 or IPv6 network. You need to enter the
network IP and the network mask length (for IPv4) or prefix length (for IPv6)
in the Mask Length field.
IP Address / Name Applicable only when you select IP Address as the object
typ
e. Enter the IP address or FQDN for the location that is
permitted to use this resource.
Network Address Applicable only when you select IP Network as the object
ty
pe. Enter the network IP address for the locations that
are permitted to use this resource. You also need to enter
the mask length (IPv4 only) or prefix length (IPv6 only):
IPv4 screen only:
Mask Length
Enter the network mask (0–31) fo
r the locations that are
permitted to use this resource.