Filter
Top Products
Virtual Private Networking Using SSL Connections
284
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
5. Click Apply to save your settings. The new configuration is added to the Defined Resource
Addresses table.
To delete a configuration from the Defined Resource Addresse
s table, click the Delete table
button to the right of the configuration that you want to delete.
Configure User, Group, and Global Policies
• View Policies
• Add an IPv4 or IPv6 SSL VPN Policy
You can define and apply user, group, and global policies to
predefined network resource
objects, IP addresses, address ranges, or all IP addresses, and to different SSL VPN
services. A specific hierarchy is invoked over which policies take precedence. The VPN
firewall policy hierarchy is defined as follows:
• User p
olicies take precedence over group policies.
• Gro
up policies take precedence over global policies.
• If two or more user
, group, or global policies are configured, the most specific policy takes
precedence.
For example, a policy that is configured for a single IP add
ress takes precedence over a
policy that is configured for a range of addresses. And a policy that applies to a range of IP
addresses takes precedence over a policy that is applied to all IP addresses. If two or more
IP address ranges are configured, then the smallest address range takes precedence. Host
names are treated the same as individual IP addresses.
Network resources are prioritized just like other address range
s. However, the prioritization is
based on the individual address or address range, not the entire network resource.
For example, assume the followin
g global policy configuration:
• Policy
1. A Deny rule has been configured to block all services to the IP address range
10.0.0.0–10.0.0.255.
• Policy
2. A Deny rule has been configured to block FTP access to 10.0.1.2–10.0.1.10.
• Policy
3. A Permit rule has been configured to allow FTP access to the predefined
network resource with the name FTP Servers. The FTP Servers network resource
includes the following addresses: 10.0.0.5–10.0.0.20 and the FQDN ftp.company.com,
which resolves to 10.0.1.3.
Object Type
(continued)
IPv6 screen only:
Prefix Length
Enter the prefix length for the locations that are permitted
to use this resource.
Port Range / Port Number A port or a range of ports (0–65535) to apply the policy to. The policy is applied
to
all TCP and UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Table 72. Resources screen settings to edit a resource (continued)
Setting Description