Filter
Top Products
LAN Configuration
88
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To edit a VLAN profile:
1. On the LAN Setup screen for IPv4 (see Figure 48 on page 84), click the Edit button in
the Action column for the VLAN profile that you want to modify. The Edit VLAN Profile
screen displays. This
screen is identical to the Add VLAN Profile screen (see Figure 49
on page 84).
2. Modif
y the settings as explained in the previous table.
3. Click Apply to save
your settings.
To enable, disable, or delete one or more VLAN profiles:
1. On
the LAN Setup screen for IPv4 (see Figure 48 on page 84), select the check box to
the left of each VLAN profile that you want to enable, disable, or delete, or click the
Select All
table button to select all profiles. (You cannot select the default VLAN profile.)
2. Click one
of the following table buttons:
• Enable. Ena
bles the VLAN or VLANs. The ! status icon changes from a gray circle to
a green circle, indicating that the selected VLAN or VLANs are enabled. (By default,
when a VLAN is added to the table, it is automatically enabled.)
• Disable. Disab
les the VLAN or VLANs. The ! status icon changes from a green circle
to a gray circle, indicating that the selected VLAN or VLANs are disabled.
• Delete. Deletes the VLAN or
VLANs.
Configure VLAN MAC Addresses and LAN Advanced Settings
By default, all configured VLAN profiles share the same single MAC address as the LAN
ports. (All LAN ports share the same MAC address.) However, you can change the VLAN
MAC settings to allow up to 16 VLANs to each be assigned a unique MAC address.
You can also enable or disable the broadcast of Address Resolution Protocol (ARP) packets
for the default VLAN. If the broadcast of ARP packets is enabled, IP addresses can be
mapped to physical addresses (that is, MAC addresses).
To configure a VLAN to have a unique MAC address:
1. Select Netwo
rk Configuration > LAN Settings. In the upper right of the screen, the
IPv4 radio button is selected by default. The LAN submenu tabs display, with the LAN
Setup screen in view, displaying the IPv4 settings (see Figure 48 on p
age 84).
2. Click the Advan
ced option arrow in the upper middle of the LAN Setup screen. The IPv4
LAN Advanced screen displays: