NETGEAR SRX5308-100NAS Switch User Manual


 
Firewall Protection
189
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
3. Click Apply to save your changes.
4. In the IP/MAC
Bindings sections of the screen, enter the settings as explained in the
following table:
5. Click the Ad
d table button. The new IP/MAC rule is added to the IP/MAC Bindings table.
To edit an IP/MAC binding:
1. I
n the IP/MAC Bindings table, click the Edit table button to the right of the IP/MAC
binding that you want to edit. The Edit IP/MAC Binding screen displays.
2. Mo
dify the settings that you wish to change (see the previous table; you can change the
MAC address, IPv4 address, and logging status).
3. Click App
ly to save your changes. The modified IP/MAC binding displays in the IP/MAC
Bindings table.
To remove one or more IP/MAC bindings from the table:
1. Select
the check box to the left of each IP/MAC binding that you want to delete, or click
the Select All table button to select all bindings.
2. Click the Del
ete table button.
To change the IPv4 MAC polling interval from its default setting of 10 seconds:
1. On
the IP/MAC Bindings screen for IPv4, to the right of the IP/MAC Binding tab, click
the Set Poll Interval option arrow. The IP MAC Binding Poll Interval pop-up screen
displays:
Figure 113.
Table 39. IP/MAC Binding screen settings for IPv4
Setting Description
Name A descriptive name of the binding for identification and management purposes.
MAC Address The MAC address of the computer or device that
is bound to the IP address.
IP Address The IPv4 address of the computer or device that is bound to the MAC address.
Log Dropped
Packets
To log the dropped packets, select Enable from the drop-down list. The default setting
is Disable.