Filter
Top Products
Network and System Management
335
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To configure the SNMP settings:
1. Select Administration > SNMP. The SNMP screen displays. (The following figure
contains an example.)
Figure 217.
The SNMPv3 Users table includes the default SNMPv3 users that are preconfigured on
the VPN firewall. The SNMPv3 Users table shows the following columns:
• User
name. The default user names (admin or guest).
• Acc
ess Type. Read-write user (RWUSER) or read-only user (ROUSER). By default,
the user Admin is an RWUSER and the user guest is an ROUSER.
• Sec
urity Level. The level of security that indicates whether security is disabled:
- NoAuthNoPriv. Both a
uthentication and privacy are disabled.
- AuthNoPriv. Authe
ntication is enabled but privacy is disabled.
- AuthPriv. Both
authentication and privacy are enabled.
The SNMP Configuration table sh
ows the following columns:
• IP
Address. The IP address of the SNMP manager.
• Sub
net Mask. The subnet mask of the SNMP manager.
• Port. T
he trap port number of the SNMP manager.
• SNMP
Version. The SNMP version (v1, v2c, or v3).
• Com
munity. The trap community string of the SNMP manager.