Filter
Top Products
LAN Configuration
105
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To configure the Router Advertisement Daemon for the LAN:
1. Select Network Configuration > LAN Settings.
2. In the uppe
r right of the screen, select the IPv6 radio button. The LAN Setup screen displays
the IPv6 settings (see Figure 55 on p
age 99.)
3. T
o the right of the LAN Setup tab, click the RADVD option arrow. The RADVD screen for the
LAN displays. (The following figure contains some examples.)
Figure 58.
4. Enter the settings as explained in the following table:
Table 20. RADVD screen settings for the LAN
Setting Description
RADVD Status Specify the RADVD status by making a selection from the drop-down list:
• Enable. The RADVD is enabled, and the RADVD fields become available for you to
configure.
• Dis
able. The RADVD is disabled, and the RADVD fields are masked out. This is the
default setting.
Advertise Mode Specify the advertisement mode by
making a selection from the drop-down list:
• Un
solicited Multicast. The VPN firewall advertises unsolicited multicast packets at
a rate that is specified by the advertisement interval.
• U
nicast only. The VPN firewall responds to unicast packet requests only. No
unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.
Advertise Interval Enter the advertisement interval of u
nsolicited multicast packets in seconds. The
minimum value is 10 seconds; the maximum value is 1800 seconds.