NETGEAR SRX5308-100NAS Switch User Manual


 
Firewall Protection
148
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 78.
To change an existing outbound or inbound service rule, in the Action column to the right of
the rule, click one of the following table buttons:
Up. Mo
ves the rule up one position in the table rank.
Down.
Moves the rule down one position in the table rank.
Edit. Allows you to make any cha
nges to the definition of an existing rule. Depending on
your selection, one of the following screens displays:
- Edit DMZ W
AN Outbound Service screen for IPv4 (identical to Figure 80 on
page 150)
- Edit DMZ W
AN Inbound Service screen for IPv4 (identical to Figure 82 on page 152)
To access the DMZ WAN Rules screen for IPv6 or to change existing IPv6 rules:
1. Select Se
curity > Firewall > DMZ WAN Rules. The Firewall submenu tabs display with
the DMZ WAN Rules screen for IPv4 in view.
2. In
the upper right of the screen, select the IPv6 radio button. The DMZ WAN Rules screen
displays the IPv6 settings. (The following figure contains examples.)