Filter
Top Products
System Logs and Error Messages
423
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Reboot
This section describes the log message generated during system reboot.
Firewall Restart
This section describes logs that are generated when the VPN firewall restarts.
IPSec Restart
This section describes logs that are generated when IPSec restarts.
Unicast, Multicast, and Broadcast Logs
Table 109. System logs: reboot
Message Nov 25 19:42:57 [SRX5308] [reboot] Rebooting in 3 seconds
Explanation Log generated when the system is rebooted from the web management interface.
Recommended action None
Table 110. System logs: VPN firewall restart
Message Jan 23 16:20:44 [SRX5308] [wand] [FW] Firewall Restarted
Explanation Log generated when the VPN firewall is restarted.
This message is logged when the VPN firewall restarts after any changes in the
configuration are applied.
Recommended action None
Table 111. System logs: IPSec restart
Message Jan 23 16:20:44 [SRX5308] [wand] [IPSEC] IPSEC Restarted
Explanation Log generated when the IPSec is restarted.
This message is logged when IPSec restarts after any changes in the configuration
are applied.
Recommended action None
Table 112. System logs: unicast
Message Nov 24 11:52:55 [SRX5308] [kernel] UCAST IN=SELF OUT=WAN SRC=
192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation • This packet (unicast) is sent to the
device from the WAN network.
• For other settings, see Table 105 on p
age 420.
Recommended action None