Filter
Top Products
Firewall Protection
150
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 DMZ WAN Outbound Service Rules
To create a new IPv4 DMZ WAN outbound rule:
1. In
the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 78 on p
age 148).
Click the Add t
able button under the Outbound Services table. The Add DMZ WAN
Outbound Service screen for IPv4 displays:
Figure 80.
2. Enter the settings as explained in Table 32 on page 133. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-do
wn lists:
• DMZ Users
• WA
N Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake selections from the following drop-down lists:
• Select Sch
edule
• NA
T IP (This drop-down list is available only when the WAN mode is NAT.)
The following configuration is optional:
• Qo
S Profile
3. Click Apply. The new rule is
now added to the Outbound Services table. The rule is
automatically enabled.