Filter
Top Products
Manage Users, Authentication, and VPN Certificates
307
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Configure Login Restrictions Based on IPv4 Addresses
To restrict logging in based on IPv4 addresses:
1. Select Us
ers > Users. The Users screen displays (see Figure 201 on page 304).
2. In
the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The policies submenu tabs display, with the Login
Policies screen in view.
3. Click the By
Source IP Address submenu tab. In the upper right of the screen, the IPv4
radio button is selected by default. The By Source IP Address screen displays the IPv4
settings. (The following figure shows an IP address in the Defined Addresses table as an
example.)
Figure 204.
4. In the Defined Addresses Status section of the screen, select one of the following radio
buttons:
• Den
y Login from Defined Addresses. Deny logging in from the IP addresses in the
Defined Addresses table.
• Allo
w Login only from Defined Addresses. Allow logging in from the IP addresses
in the Defined Addresses table.
5. Click App
ly to save your settings.