Filter
Top Products
Monitor System Access and Performance
377
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 248.
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table:
Click Disconn
ect to disconnect the connection; click Connect to establish the
connection.
View the Attached Devices and the DHCP Log
The LAN Groups screen shows the network database, which is the Known PCs and Devices
table, which contains all IP devices that VPN firewall has discovered on the local network.
The LAN Setup screen lets you access the DHCP log.
Table 98. Connection Status screen information for an IPv6 connection
Item Description
Connection Time The period that the VPN firewall has been connected through the WAN
port.
IPv6 Connection Type The connection type can be either Dynamic IP (DHCP),
Static, or PPPoE.
IPv6 Connection Status The connection status can be either Connected or Disconnected.
IPv6 Address The IPv6 addresses that were automatically detected or that you
configured on the WAN IPv6 ISP Settings screen.
Note: The Gateway and DNS Server (IPv6) fields apply only to static IPv6
a
nd PPPoE IPv6 connections.
Note: For more information, see Use a DHCPv6 Server to Configure an
IPv6 Internet Connection on pag
e 54 and Configure a Static IPv6 Internet
Connection on pag
e 57.
Gateway
Primary DNS Server (IPv6)
Secondary DNS Server (IPv6)