NETGEAR SRX5308-100NAS Switch User Manual


 
IPv4 and IPv6 Internet and WAN Settings
33
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 13.
The Connection Status screen should show a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, skip ahead to Manually
Configure an IPv4 Internet Connection on p
age 33, or see Troubleshoot the ISP
Connection o
n page 388.
Note: For more information about the Connection Status screen, see View
the WAN Port Status on page 374.
Manually Configure an IPv4 Internet Connection
Unless your ISP automatically assigns your configuration through a DHCP server, you need
to obtain configuration parameters from your ISP to manually establish an Internet
connection. The required parameters for various connection types are listed in Table 2 on
page 32.
To manually configure the WAN IPv4 ISP settings:
1. Select Network Co
nfiguration > WAN Settings > WAN Setup. In the upper right of the
screen, the IPv4 radio button is selected by default. The WAN Setup screen displays the
IPv4 settings:
Figure 14.