Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
254
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
5. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
6. Click the
Advanced tab in the Authentication pane. The Advanced pane displays:
Figure 166.
7. Specify the settings that are explained in the following table.
IKE Encryption Select the 3DES encryption algorithm from the drop-down list.
Authentication Select the SHA1 authentication algorithm from the drop-down list.
Key Group Select the DH
2 (1024) key group from the drop-down list.
Note: On the VPN firewall, this key group is referred to as
Diffie-Hellman Group 2 (1024 bit).
Table 61. VPN client advanced authentication settings (Mode Config)
Setting Description
Advanced features
Mode Config Select this check box to enable Mode Config.
Aggressive Mode Select this check box to enable aggressive mode as the mode of negotiation with
the VPN
firewall.
Table 60. VPN client authentication settings (Mode Config) (continued)
Setting Description