Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
228
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
4. Complete the settings as explained in the following table:
Table 53. Add IKE Policy screen settings
Setting Description
Mode Config Record
Do you want to use
Mod
e Config Record?
Specify whether the IKE policy uses a Mode Config record. For information about
how to define a Mode Config record, see Mode Config Operation on
page 244.
Select one of the following radio buttons:
• Ye
s. IP addresses are assigned to remote VPN clients. You need to select a
Mode Config record from the drop-down list.
Because Mode Config functions only in Aggressive mode, selecting the Yes
radio button sets the tunnel exchange mode to Aggressive mode and disables
the Main mode. Mode Config also requires that both the local and remote
endpoints are defined by their FQDNs.
• No. Di
sables Mode Config for this IKE policy.
Note: You can use an IPv6 IKE policy to assign IPv4 addresses to clients through
a
Mode Config record, but you cannot assign IPv6 addresses to clients.
Select Mode
Config Record
From the drop-down list, select one of the Mode Config
records that you defined on the Add Mode Config Record
screen (see Configure Mode Config Operation on the VPN
Firewall on p
age 244).
Note: Click the View Selected button to
open the Selected
Mode Config Record Details pop-up screen.
General
Policy Name A descriptive name of the IKE policy for
identification and management purposes.
Note: The name is not supplied to the remote VPN endpoint.
Direction / Type From the drop-down list, select the connection method for the VPN firewall:
• Ini
tiator. The VPN firewall initiates the connection to the remote endpoint.
• Re
sponder. The VPN firewall responds only to an IKE request from the remote
endpoint.
• Both. T
he VPN firewall can both initiate a connection to the remote endpoint
and respond to an IKE request from the remote endpoint.
Exchange Mode From the drop-down list, select the mode of exchan
ge between the VPN firewall
and the remote VPN endpoint:
• Main.
This mode is slower than the Aggressive mode but more secure.
• Aggre
ssive. This mode is faster than the Main mode but less secure.
Local
Select Local Gateway Select a WAN interface from the drop-down list to specify the WAN interface for
the local gateway.