Filter
Top Products
IPv4 and IPv6 Internet and WAN Settings
65
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To configure an ISATAP tunnel:
1. Select Network Configuration > WAN Settings > ISATAP Tunnels. The ISATAP
Tunnels screen displays. (The following figure shows some examples.)
Figure 37.
2. Click the Add table button under the List of Available ISATAP Tunnels table. The Add
ISATAP Tunnel screen displays:
Figure 38.
3. Specify the tunnel settings as explained in the following table.
4. Click App
ly to save your changes.
Table 11. Add ISATAP Tunnel screen settings
Setting Description
ISATAP Subnet Prefix The IPv6 prefix for the tunnel.
Local End Point
Address
From the drop-down list, select the type of local address:
• LAN. The local endpoint address is the address of the default VLAN.
• Oth
er IP. The local endpoint address is another LAN IP address that you need
to specify in the IPv4 Address fields.
IPv4 Address If you select Other IP from the Loca
l End Point Address drop-down list, enter the
IPv4 address.