Filter
Top Products
Firewall Protection
169
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
address. A ping can be used as a diagnostic tool. Keep this check box cleared unless
you have a specific reason to enable the VPN firewall to respond to a ping from the
Internet.
• IP
sec. Select the IPsec check box to enable IPSec VPN traffic that is initiated from
the LAN to reach the WAN, irrespective of the default firewall outbound policy and
custom firewall rules.
4. Click App
ly to save your settings.
Set Limits for IPv4 Sessions
The session limits feature allows you to specify the total number of sessions that are allowed,
per user, over an IPv4 connection across the VPN firewall. The session limits feature is
disabled by default.
To enable and configure session limits:
1. Select Se
curity > Firewall > Session Limit. The Session Limit screen displays:
Figure 99.
2. Select the Yes radio button under Do you want to enable Session Limit?