Filter
Top Products
Firewall Protection
156
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 LAN DMZ Outbound Service Rules
To create a new IPv4 LAN DMZ outbound rule:
1. In
the upper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see Figure 84 on p
age 154).
Click the Add t
able button under the Outbound Services table. The Add LAN DMZ
Outbound Service screen for IPv4 displays:
Figure 86.
2. Enter the settings as explained in Table 32 on page 133. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-do
wn lists:
• LAN Users
• DMZ Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake a selection from the following drop-down list:
• Select Sch
edule
3. Click Apply. The new rule is
now added to the Outbound Services table. The rule is
automatically enabled.
IPv6 LAN DMZ Outbound Service Rules
To create a new IPv6 LAN DMZ outbound rule:
1. In
the upper right of the LAN DMZ Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 85 on
page 155).
2. Click the Add t
able button under the Outbound Services table. The Add LAN DMZ
Outbound Service screen for IPv6 displays: