Filter
Top Products
Firewall Protection
146
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Enter the settings as explained in Table 33 on page 137. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-do
wn lists:
• W
AN Destination IP Address
• LAN Users (This drop
-down list is available only when the WAN mode is Classical
Routing. When the WAN mode is NAT, your network presents only one IP address to
the Internet.)
• WA
N Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake selections from the following drop-down lists:
• Select Sch
edule
• Send to
Lan Server
The following configurations a
re optional:
• T
ranslate to Port Number
• Qo
S Profile
• Bandwid
th Profile
3. Click Apply
to save your changes. The new rule is now added to the Inbound Services
table.
IPv6 LAN WAN Inbound Rules
To create a new IPv6 LAN WAN inbound rule:
1. In
the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 73 on
page 142).
2. Click the Add t
able button under the Inbound Services table. The Add LAN WAN Inbound
Service screen for IPv6 displays:
Figure 77.