Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
198
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Use the IPSec VPN Wizard for Client and Gateway
Configurations
You can use the IPSec VPN Wizard to configure multiple gateway or client VPN tunnel
policies.
The following sections provide wizard and NETGEAR ProSafe VPN Client sof
tware
configuration procedures:
• Create an IPv4 Gateway-to-Gateway VPN Tunnel with the Wizard on p
age 198
• Create an IPv6 Gateway-to-Gateway VPN Tunnel with the Wizard on p
age 203
• Create an IPv4 Client-to-Gateway VPN Tunnel with the Wizard on p
age 206
Note: Although the VPN firewall supports IPv6, the NETGEAR ProSafe
VPN Client supports IPv4 only; an upcoming release of the VPN
Client will support IPv6.
Configuring a VPN tunnel connection requires that you specify all settings on both sides of
the VPN tunnel to match or mirror each other precisely, which can be a daunting task. The
VPN Wizard efficiently guides you through the setup procedure with a series of questions that
determine the IPSec keys and VPN policies it sets up. The VPN Wizard also configures the
settings for the network connection: security association (SA), traffic selectors, authentication
algorithm, and encryption. The settings that are used by the VPN Wizard are based on the
recommendations of the VPN Consortium (VPNC), an organization that promotes
multivendor VPN interoperability.
Create an IPv4 Gateway-to-Gateway VPN Tunnel with the
Wizard
Figure 121.
To set up an IPv4 gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Select VPN > IPSec
VPN > VPN Wizard. In the upper right of the screen, the IPv4 radio
button is selected by default. The VPN Wizard screen displays the IPv4 settings. (The