Filter
Top Products
Firewall Protection
143
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Create LAN WAN Outbound Service Rules
You can define rules that specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP
addresses, and time of day. An outbound rule can block or allow traffic between an internal IP
LAN address and any external WAN IP address according to the schedule created on the
Schedule screen.
WARNING:
Make sure that you understand the consequences of a LAN WAN
outbound rule before you apply the rule. Incorrect configuration
might cause serious connection problems.
You can also tailor these rules to your specific needs (see Administrator Tips on page 131).
IPv4 LAN WAN Outbound Rules
To create a new IPv4 LAN WAN outbound rule:
1. In the upper
right of the LAN WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 72 o
n page 141).
Click the Add t
able button under the Outbound Services table. The Add LAN WAN
Outbound Service screen for IPv4 displays:
Figure 74.
2. Enter the settings as explained in Table 32 on page 133. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down
lists:
• LA
N Users
• W
AN Users