Filter
Top Products
Manage Users, Authentication, and VPN Certificates
308
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
6. In the Add Defined Addresses section of the screen, add an address to the Defined
Addresses table by entering the settings as explained in the following table:
7. Click the Add t
able button. The address is added to the Defined Addresses table.
8. Repeat
Step 6 and Step 7 for any other addresses that you want to add to the Defined
Addresses table.
To delete one or more IPv4 addresses:
1. In
the Defined Addresses table, select the check box to the left of each address that you
want to delete, or click the Select All table button to select all addresses.
2. Click the Delete t
able button.
Configure Login Restrictions Based on IPv6 Addresses
To restrict logging in based on IPv6 addresses:
1. Select Users > Users. The
Users screen displays (see Figure 201 on page 304).
2. In
the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The policies submenu tabs display, with the Login
Policies screen in view.
3. Click the By Sou
rce IP Address submenu tab.
4. In the upp
er right of the screen, select the IPv6 radio button. The By Source IP Address
screen displays the IPv6 settings. (The following figure shows an IP address in the Defined
Addresses table as an example.)
Table 78. Defined addresses settings for IPv4
Setting Description
Source Address Type Select the type of address from the drop-down list:
• IP Ad
dress. A single IPv4 address.
• IP Network. A subnet of IPv4 addresses. You need to enter a netmask length in
the Mask Length field.
Network Address / IP
Address
Depending on your selection from the Sou
rce Address Type drop-down list, enter
the IP address or the network address.
Mask Length For a network address, enter the netmask length (0–32).
Note: By default, a single IPv4 address is assigned a netmask length of 32.