Filter
Top Products
Monitor System Access and Performance
369
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
The following table explains the fields of the VLAN Status screen:
Tunnel Status Screen
The IPv6 Tunnel Status screen displays the status of all active 6to4 and ISATAP tunnels and
their IPv6 addresses.
To view the status of the tunnels and IPv6 addresses:
Select Monit
oring > Router Status > Tunnel Status. The Tunnel Status screen displays:
Figure 236.
Table 93. VLAN Status screen information
Item Description
Profile Name The unique name for the VLAN that you have assigned on
the Add VLAN Profile screen.
For information about
configu
ring VLANs, see
Configure a VLAN Profile
on page 83.
VLAN ID The identifier for the VLAN that you have assigned on the
Ad
d VLAN Profile screen.
MAC Address VLANs can have the same MAC address as the associated
LAN port or can be assigned a unique MAC address,
depending on the VLAN MAC settings that you have
specified on the IPv4 LAN Advanced screen (see Configure
VLAN MAC Addresses and LAN Advanced Settings on
page 88).
Subnet IP The IP address and subnet mask that you have assigned on
the
Add VLAN Profile screen.
DHCP Status The DHCP status for the VLAN, which can be either DHCP
Enabled or DHCP Disabled, depending on the DHCP
configuration that you have specified on the Add VLAN
Profile screen.
Port Membership The ports that you have associated with the VLAN on the Add
VL
AN Profile screen.