Filter
Top Products
Virtual Private Networking Using SSL Connections
287
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
.
Figure 189. Add SSL VPN Policy screen for IPv6
4. Complete the settings as explained in the following table:
Table 73. Add SSL VPN Policy screen settings
Setting Description
Policy For
Select one of the following radio buttons to specify the type of SSL VPN policy:
• Glo
bal. The new policy is global and includes all groups and users.
• Grou
p. The new policy needs to be limited to a single group. From the drop-down list, select a group
name. For information about how to create groups, see Configure Groups on page 300.
• Use
r. The new policy needs to be limited to a single user. From the drop-down list, select a user name.
For information about how to create user accounts, see Configure User Accounts on page 303.
Add SSL VPN Policies
Apply
P
olicy to?
Select one of the following radio buttons to specify how the policy is applied. When you select
a radio button, the fields and drop-down lists that apply to your selection (see explanations
later in this table) unmask onscreen.
• Networ
k Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see Use Network Resource Object
s to Simplify Policies on
page 281).
• IP Ad
dress. The policy is applied to a single IP address.
• IP Netw
ork. The policy is applied to a network address.
• All Add
resses. The policy is applied to all addresses.
Network
Resource
Policy Name A descriptive name of the SSL VPN policy for identification and
ma
nagement purposes.
Defined
Resources
From the drop-down list, select a network resource that you
h
ave defined on the Resources screen (see Use Network
Resource Objects to Simplify Policies on p
age 281).
Permission From the drop-down list, select Permit or Deny to
specify
whether the policy permits or denies access.