Filter
Top Products
LAN Configuration
116
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
4. Click Apply to save your settings.
IPv6 DMZ Address Pools
If you configure a stateful DHCPv6 server for the DMZ, you need to add local DHCP IPv6
address pools so the DHCPv6 server can control the allocation of IPv6 addresses in the
DMZ.
To add an IPv6 DMZ address pool:
1. On
the DMZ Setup screen for IPv6 (see Figure 62 on page 114), under the List of IPv6
Address Pools table, click Add. The DMZ IPv6 Config
screen displays:
Figure 63.
DHCP Status
(continued)
DNS Server Select one of the DNS server options from the drop-down lists:
• Use DNS Proxy. The VPN firewall acts as a proxy for all
DNS requests and communicates with the ISP’s DNS servers
that you configured on the WAN IPv6 ISP Settings screen
(see Configure a Static IPv6 Internet Connection on
page 57).
• Us
e DNS from ISP. The VPN firewall uses the ISP’s DNS
servers that you configured on the WAN ISP IPv6 Settings
screen (see Configure a Static IPv6 Internet Connection on
page 57).
• Use be
low. When you select this option, the DNS server
fields become available for you to enter IP addresses.
Primary DNS Server Enter the IP address of the primary
DNS server for the DMZ.
Secondary DNS Server Enter the IP address of the
secondary DNS server for the DMZ.
Lease/Rebind
Time
Enter the period after which the DHCP lease is renewed with
the original DHCP server or rebound with another DHCP server
to extend the existing DHCP lease. The default period is
86400 seconds (24 hours).
Table 23. DMZ Setup screen settings for IPv6 (continued)
Setting Description