Filter
Top Products
System Logs and Error Messages
421
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
System Log Messages
• NTP
• Login/Logout
• System Startup
• Reboot
• Firewall Restart
• IPSec Restart
• Unicast, Multicast, and Broadcast Logs
• WAN Status
• Resolved DNS Names
• VPN Log Messages
• Traffic Meter Logs
This section describes log messages that belong
to one of the following categories:
• L
ogs generated by traffic that is meant for the VPN firewall.
• L
ogs generated by traffic that is routed or forwarded through the VPN firewall.
• L
ogs generated by system daemons, the NTP daemon, the WAN daemon, and other
daemons.
For information about how to select many of these logs, see Configure Lo
gging, Alerts, and
Event Notifications on page 353.
NTP
This section describes log messages generated by the NTP daemon during synchronization
with the NTP server.
Table 106. System logs: NTP
Message Nov 28 12:31:13 [SRX5308] [ntpdate] Looking Up time-f.netgear.com
Nov 28 12:31:13 [SRX5308] [ntpdate] Requesting time from time-f.netgear.com
Nov 28 12:31:14 [SRX5308] [ntpdate] adjust time server 69.25.106.19 offset
0.140254 sec
Nov 28 12:31:14 [SRX5308] [ntpdate] Synchronized time with time-f.netgear.com
Nov 28 12:31:16 [SRX5308] [ntpdate] Date and Time Before Synchronization: Tue
Nov 28 12:31:13 GMT+0530 2006
Nov 28 12:31:16 [SRX5308] [ntpdate] Date and Time After Synchronization: Tue
Nov 28 12:31:16 GMT+0530 2006
Nov 28 12:31:16 [SRX5308] [ntpdate] Next Synchronization after 2 Hours