Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
253
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
3. Change the name of the authentication phase (the default is Gateway):
a. R
ight-click the authentication phase name.
b. Select Rename.
c. T
ype GW_ModeConfig.
d. Click anywh
ere in the tree list pane.
Note: This is the name for the authentication phase that is used only for the
VPN
client, not during IKE negotiation. You can view and change this name in
the tree list pane. This name needs to be a unique name.
The Authentication pane displays in the Configuration Pane
l screen, with the
Authentication tab selected by default:
Figure 165.
4. Specify the settings that are explained in the following table.
Table 60. VPN client authentication settings (Mode Config)
Setting Description
Interface Select Any fro
m the drop-down list.
Remote Gateway Enter the remote IP address or DNS name of th
e VPN firewall. For example, enter
192.168.15.175.
Preshared Key Select the Preshared Key radio button. Enter the pre-shared key that you already
specified on the VPN firewall. For example, enter H8!spsf3#JYK2!. Confirm the key in
the Confirm field.