Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
229
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Identifier From the drop-down list, select one of the following ISAKMP identifiers to be used
by the VPN firewall, and then specify the identifier in the Identifier field:
• Lo
cal Wan IP. The WAN IP address of the VPN firewall. When you select this
option, the Identifier field automatically shows the IP address of the selected
WAN interface.
• FQ
DN. The Internet address for the VPN firewall.
• User
FQDN. The email address for a local VPN client or the VPN firewall.
• DER ASN1
DN. A distinguished name (DN) that identifies the VPN firewall in the
DER encoding and ASN.1 format.
Identifier Depending on the selection of the Identifie
r drop-down list,
enter the IP address, email address, FQDN, or distinguished
name.
Remote
Identifier From the drop-down list, select one of the following ISAKMP identifiers
to be used
by the remote endpoint, and then specify the identifier in the Identifier field:
• Rem
ote Wan IP. The WAN IP address of the remote endpoint. When you select
this option, the Identifier field automatically shows the IP address of the selected
WAN interface.
• FQ
DN. The FQDN for a remote gateway.
• User
FQDN. The email address for a remote VPN client or gateway.
• DER
ASN1 DN. A distinguished name (DN) that identifies the remote endpoint
in the DER encoding and ASN.1 format.
Identifier Depending on the selection of the Identifier drop-down list,
enter the IP address, email address, FQDN, or distinguished
name.
IKE SA Parameters
Encryption Algorithm From the drop-down list, select one of the following five algorithms to negotiate the
security association
(SA):
• DES. Dat
a Encryption Standard (DES).
• 3DES. T
riple DES. This is the default algorithm.
• AES-128.
Advanced Encryption Standard (AES) with a 128-bit key size.
• AES-192. AES with a
192-bit key size.
• AES-256. AES with a 256-bit key size.
Authentication
Al
gorithm
From the drop-down list, select one of the following two algorithms to use in the
VPN header for the authentication process:
• SHA-1. Ha
sh algorithm that produces a 160-bit digest. This is the default
setting.
• MD5. Hash
algorithm that produces a 128-bit digest.
Table 53. Add IKE Policy screen settings (continued)
Setting Description