Filter
Top Products
Firewall Protection
152
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 DMZ WAN Inbound Service Rules
To create a new IPv4 DMZ WAN inbound rule:
1. In
the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 78 on p
age 148).
Click the Add t
able button under the Inbound Services table. The Add DMZ WAN
Inbound Service screen for IPv4 displays:
Figure 82.
2. Enter the settings as explained in Table 33 on page 137. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-do
wn lists:
• W
AN Destination IP Address
• DMZ Users (Th
is drop-down list is available only when the WAN mode is Classical
Routing. When the WAN mode is NAT, your network presents only one IP address to
the Internet.)
• WA
N Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake selections from the following drop-down lists:
• Select Sch
edule
• Send to
DMZ Server
The following configurations a
re optional:
• T
ranslate to Port Number
• Qo
S Profile
3. Click Apply
to save your changes. The new rule is now added to the Inbound Services
table.