Filter
Top Products
Firewall Protection
157
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 87.
3. Enter the settings as explained in Table 32 on page 133. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down
lists:
• LA
N Users
• DMZ Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake a selection from the following drop-down list:
• Select
Schedule
4. Click App
ly. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is
blocked.
IPv4 LAN DMZ Inbound Service Rules
To create a new IPv4 LAN DMZ inbound rule:
1. In the u
pper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see Figure 84 o
n page 154).
Click the Add t
able button under the Inbound Services table. The Add LAN DMZ Inbound
Service screen for IPv4 displays: