Filter
Top Products
IPv4 and IPv6 Internet and WAN Settings
60
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Configure a PPPoE IPv6 Internet Connection
To configure a PPPoE IPv6 Internet connection, you need to enter the PPPoE IPv6
information that you should have received from your ISP.
To configure PPPoE IPv6 ISP settings for a WAN interface:
1. Select Netwo
rk Configuration > WAN Settings > WAN Setup.
2. In
the upper right of the screen, select the IPv6 radio button. The WAN Setup screen
displays the IPv6 settings:
Figure 34.
The IPv6 WAN Settings table displays the following fields:
• WA
N. The WAN interface (WAN1, WAN2, WAN3, and WAN4).
• St
atus. The status of the WAN interface (UP or DOWN).
• W
AN IP. The IPv6 address of the WAN interface.
• Action. The Edit t
able button provides access to the WAN IPv6 ISP Settings screen
(see Step 3) for the corresponding WAN interface; the S
tatus button provides access
to the Connection Status screen (see Step 7) for the corresponding WAN interface.
3. Click the Edit
table button in the Action column of the WAN interface for which you want to
automatically configure the connection to the Internet. The WAN IPv6 ISP Settings screen
displays. (The following figure shows the WAN2 IPv6 ISP Settings screen as an example.)