Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
224
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
interval period, enter a new value in the Poll Interval field, and then click the Set Interval
button. To stop polling, click the Stop button.
View the VPN Firewall IPSec VPN Log
To display the IPSec VPN log:
Select Monitoring > VPN Logs
> IPSec VPN Logs. The IPSec VPN Logs screen displays:
Figure 153.
Table 51. IPSec VPN Connection Status screen information
Item Description
Policy Name The name of the VPN policy that is associated with this SA.
Endpoint The IP address on the remote VPN endpoint.
Tx (KB) The amount of data that is transmitte
d over this SA.
Tx (Packets) The number of IP packets that are transmitted over this SA.
State The status of the SA. Phase 1 is
the authentication phase, and Phase 2 is key exchange
phase. If there is no connection, the status is IPSec SA Not Established.
Action Click the Connect table button to build the connection, or click the Disconnect table
button to terminate the connection.