Filter
Top Products
Firewall Protection
190
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Click the Stop button. Wait until the Poll Interval field becomes available.
3. Enter new poll interva
l in seconds.
4. Click the Set Inter
val button. Wait for the confirmation that the operation has succeeded
before you close the window.
IPv6/MAC Bindings
To set up a binding between a MAC address and an IPv6 address:
1. Select Security > Address
Filter > IP/MAC Binding.
2. In
the upper right of the screen, select the IPv6 radio button. The IP/MAC Binding screen
displays the IPv6 settings. (The following figure shows a binding in the IP/MAC Binding table
as an example.)
Figure 114.
3. In the Email IP/MAC Violations section of the screen, specify if you want to enable email
logs for IP/MAC binding violations. (You have to do this only once.) Select one of the
following radio buttons:
• Ye
s. IP/MAC binding violations are emailed. Click the Firewall Logs & E-mail page
link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen
(see Configure Logging, Alerts, and Event Notifications on p
age 353).
• No. IP/MAC bindin
g violations are not emailed.
4. Click Apply
to save your changes.