Filter
Top Products
IPv4 and IPv6 Internet and WAN Settings
76
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
4. Click Apply to save your settings. The profile is added to the List of QoS Profiles table on
the QoS screen.
To add a priority queue QoS profile:
1. Select Netwo
rk Configuration > QoS. The QoS screen displays.
2. Under
the List of QoS Profiles table, click the Add table button. The Add QoS screen
displays. The following figure shows settings for a priority QoS profile:
Figure 46.
3. Enter the settings as explained in the following table:
Inbound Maximum
Bandwidth
Enter the inbound maximum bandwidth in Kbps that is allocated to the host.
Diffserv QoS Remark Enter a DSCP value in the range of 0 through 63. Packets are marked with this
value. Leave this field blank to disable packet marking.
Table 14. Add QoS screen settings for a priority profile
Setting Description
QoS Type Priority (for Rate Control, see Figure 45 on page 74 and Table 13 on page 74).
Interface From the drop-down list, select one of the WAN interfaces.
Table 13. Add QoS screen settings for a rate control profile (continued)
Setting Description