Filter
Top Products
Firewall Protection
173
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 101.
2. In the Add Customer Service section of the screen, enter the settings as explained in the
following table:
3. Click Appl
y to save your settings. The new custom service is added to the Custom Services
table.
To edit a service:
1. I
n the Custom Services table, click the Edit table button to the right of the service that
you want to edit. The Edit Service screen displays:
Table 36. Services screen settings
Setting Description
Name A descriptive name of the service for identification and management purposes.
Type From the Type drop-down list, select the Layer 3 protocol that the service uses as its
transport protocol:
• TCP
• UDP
• ICMP
• ICMPv6
ICMP Type A numeric value that can range between 0 and 40. For a list of ICMP types, see
http://www.iana.org/assignment
s/icmp-parameters.
Note: T
his field is enabled only when you select ICMP or ICMPv6 from the Type
drop-down list.
Start Port The first TCP or UDP port of a range that the service uses.
Note: T
his field is enabled only when you select TCP or UDP from the Type drop-down list.
Finish Port The last TCP or UDP port of a ran
ge that the service uses. If the service uses only a single
port number, enter the same number in the Start Port and Finish Port fields.
Note: T
his field is enabled only when you select TCP or UDP from the Type drop-down list.