Filter
Top Products
Firewall Protection
138
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
LAN Users These settings apply to a LAN WAN inbound rule when the WAN
mode is classical routing, and determine which computers on
your network are affected by this rule. The options are:
• Any. All
computers and devices on your LAN.
• Single address. Enter th
e required address in the Start field to
apply the rule to a single device on your LAN.
• Add
ress range. Enter the required addresses in the Start and
Finish fields to apply the rule to a range of devices.
• Gro
up. Select the LAN group to which the rule applies. Use
the LAN Groups screen to assign computers to groups (see
Manage the Network Database on p
age 92). Groups apply
only to IPv4 rules.
• IP G
roup. Select the IP group to which the rule applies. Use
the IP Groups screen to assign IP addresses to groups. See
Create IP Groups on page 174.
Note: Fo
r IPv4 LAN WAN inbound rules, this field does not
apply when the WAN mode is NAT because your network
presents only one IP address to the Internet.
LAN WAN rules
LAN DMZ rules
WAN Users The settings that determine which
Internet locations are covered
by the rule, based on their IP address. The options are:
• Any. All
Internet IP addresses are covered by this rule.
• Si
ngle address. Enter the required address in the Start field.
• Address range. Enter the required addresses in the Start and
Finish fields.
• IP G
roup. Select the IP group to which the rule applies. Use
the IP Groups screen to assign IP addresses to groups. See
Create IP Groups on p
age 174.
LAN WAN rules
DMZ WAN rules
DMZ Users The settings that determine which DMZ computers on the DMZ
network are affected by this rule. The options are:
• Any. All computers
and devices on your DMZ network.
• Single address. Enter th
e required address in the Start field to
apply the rule to a single computer on the DMZ network.
• Add
ress range. Enter the required addresses in the Start and
Finish fields to apply the rule to a range of DMZ computers.
Note: Fo
r IPv4 DMZ WAN inbound rules, this field does not
apply when the WAN mode is NAT because your network
presents only one IP address to the Internet.
DMZ WAN rules
LAN DMZ rules
Table 33. Inbound rules overview (continued)
Setting Description Inbound Rules