Filter
Top Products
System Management: Standard Commands
KAT4000 User’s Manual 10007175-02
9-10
Set Sensor Hysteresis Sensor/Event 04, 05 00 24
Get Sensor Hysteresis Sensor/Event 04, 05 00 25
Set Sensor Thresholds Sensor/Event 04, 05 00 26
Get Sensor Thresholds Sensor/Event 04, 05 00 27
Set Sensor Event Enable Sensor/Event 04, 05 00 28
Get Sensor Event Enable Sensor/Event 04, 05 00 29
Rearm Sensor Events Sensor/Event 04, 05 00 2A
Get Sensor Events Sensor/Event 04, 05 00 2B
Get Sensor Reading Sensor/Event 04, 05 00 2D
Set Sensor Type Sensor/Event 04, 05 00 2E
Get Sensor Type Sensor/Event 04, 05 00 2F
Get Device ID Application 06, 07 00 01
Broadcast 'Get Device ID' Application 06, 07 00 01
Cold Reset Application 06, 07 00 02
Warm Reset Application 06, 07 00 03
Get Self Test Results Application 06, 07 00 04
Get Device GUID Application 06, 07 00 08
Reset Watchdog Timer Application 06, 07 00 22
Set Watchdog Timer Application 06, 07 00 24
Get Watchdog Timer Application 06,07 00 25
Send Message Application 06,07 00 34
Get FRU Inventory Area Info Storage 0A, 0B 00 10
Read FRU Data Storage 0A, 0B 00 11
Write FRU Data Storage 0A, 0B 00 12
Get PCIMG Properties PICMG 2C, 2D 00 00
Get Address Info PICMG 2C, 2D 00 01
FRU Control PICMG 2C, 2D 00 04
Get FRU LED Properties PICMG 2C, 2D 00 05
Get LED Color Capabilities PICMG 2C, 2D 00 06
Set FRU LED State PICMG 2C, 2D 00 07
Get FRU LED State PICMG 2C, 2D 00 08
Set IPMB State Command PICMG 2C, 2D 00 09
Set FRU Activation Policy PICMG 2C, 2D 00 0A
Get FRU Activation Policy PICMG 2C, 2D 00 0B
Set FRU Activation PICMG 2C, 2D 00 0C
Get Device Locator Record ID PICMG 2C, 2D 00 0D
Get Port State PICMG 2C, 2D 00 0E
Set Port State PICMG 2C, 2D 00 0F
Compute Power Properties PICMG 2C, 2D 00 10
Set Power Level PICMG 2C, 2D 00 11
Command: (continued) netFn: LUN: Cmd: