Filter
Top Products
System Management: Vendor Commands
10007175-02 KAT4000 User’s Manual
9-21
Reset IPMC Command
The Reset IPMC command allows the payload to reset the IPMC over the SIPL.
Table 9-19: Reset IPMC Command
Hang IPMC Command
The IPMC provides a way to test the watchdog timer support by implementing the Hang
IPMC command, which simulates firmware hanging by entering an endless loop.
Table 9-20: Hang IPMC Command
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4 Reset Type Code
0x00 Cold IPMC reset to the current mode
0x01 Cold IPMC reset to the Normal mode
0x02 Cold IPMC reset to the Standalone mode
0x03 Cold IPMC reset to the Manual Standalone mode
0x04 Reset the IPMC and enter Upgrade mode
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)