Filter
Top Products
Appendix A: Serial Command Line Interface (CLI)
10007175-02 KAT4000 User’s Manual
A-15
Description: Show the configured QoS mode, default class and DSCP mapping for the port.
[<portlist>]: Port list (Default: All ports).
QoS Mode: Syntax:
QoS Mode [<portlist>] [tag|port|diffserv]
Description: Set or show the QoS mode for the port.
[<portlist>]: Port list (Default: All ports).
[tag|port|diffserv]: Enable tag, port or IP differentiated services class of service for the
port (Default: Show mode).
QoS Default: Syntax:
QoS Default [<portlist>] [<class>]
Description: Set or show the default class. In tag mode, the default class is used for
untagged frames. In port mode, the default class is used as the port priority. In diffserv
mode, the default class is used for non-IP frames.
[<portlist>]: Port list (Default: All ports).
[<class>]: Internal class of service (Default: Show class).
QoS Tagprio: Syntax:
QoS Tagprio [<portlist>] [<tagpriolist>] [<class>]
Description: Set or show the VLAN user priority mapping.
[<portlist>]: Port list (Default: All ports).
[<tagpriolist>]: VLAN user priority list, 0-7 (Default: All user priorities).
[<class>]: Internal class of service (Default: Show class).
QoS DiffServ: Syntax:
QoS DiffServ [<dscpno>] [<class>]
Description: Set or show the IP Differentiated Services mapping.
[<dscpno>]: IP DSCP list, 0-63 (Default: All DSCP values).
[<class>]: Internal class of service (Default: Show class).
QoS Userprio: Syntax:
QoS Userprio [<portlist>] [<tagprio>]
Description: Set or show the default VLAN user priority for received untagged frames.
[<portlist>]: Port list (Default: All ports).