Filter
Top Products
System Management: Vendor Commands
KAT4000 User’s Manual 10007175-02
9-20
Set Payload Communication Time-Out Command
The Set Payload Communication Time-Out command sets the payload communication
time-out value.
Table 9-17: Set Payload Communication Time-Out Command
Enable Payload Control Command
The Enable Payload Control command enables payload control from the Serial Debug inter-
face.
Register 9-1: Enable Payload Control Command
Disable Payload Control Command
The Disable Payload Control command disables payload control from the Serial Debug
interface.
Table 9-18: Disable Payload Control Command
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
4Payload Time-out
Payload communication time-out measured in hundreds of
milliseconds. Thus, the payload communication time-out
may vary from 0.1 to 25.5 seconds.
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Type: Byte: Data Field:
Request Data 1:3 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID, MS Byte first
0x00400A = 16394 (Pigeon Point Systems)