Filter
Top Products
10007175-02 KAT4000 User’s Manual
13-1
Section 13
Rear Transition Module
The KAT-Z3DB is an optional, single-slot ATCA Rear Transition Module (RTM) providing rear
shelf I/O access for the KAT4000. This RTM is for development purposes only. It has not
been tested for EMI, EMC or ESD.
This RTM connects to the KAT4000’s Zone 3 connectors, J30-J32, and ATCA connector, J33.
This chapter describes the physical layout of the RTM and the installation process.
COMPONENTS AND FEATURES
ATCA RTM Form Factor: The RTM has a K1 alignment feature in Zone 2, an A1 Zone 3 alignment and keying feature,
Zone 3 connectors, an ESD discharge strip, four AMC site serial ports, an ethernet debug
port, a host serial port, a fat pipe serial port, and board and IPMI reset switches.
Console Port Interface: EIA-232 is routed through six micro-D connectors (P1, P2, P4-P7) and one RJ45 connector
(P3) at the rear I/O face plate.
Reset: The RTM front panel provides two reset switches: a board reset and an IPMI reset.
Note: The RTM reset switches are not functional with the rev. 00 KAT4000.