Filter
Top Products
Monitor: Command-Line Features
10007175-02 KAT4000 User’s Manual
14-3
The monitor command prompt in Fig. 14-2 is the result of a successful hardware boot of the
KAT4000 with a 10 GbE-1 GbE fat pipe switch module.
Figure 14-2: Example Monitor Start-up Display for KAT4000 with 10 GbE-1 GbE Fat Pipe Switch Module
U-Boot 1.1.4 (Apr 03 2007 - 15:20:30)1.3d
CPU: 8548_E, Version: 2.0, (0x80390020)
Core: E500, Version: 2.0, (0x80210020)
Clock Configuration:
CPU: 999 MHz, CCB: 399 MHz,
DDR: 199 MHz, LBC: 49 MHz
Board: KAT4000 AMC Carrier
Emerson Network Power, Embedded Computing
cPLD Ver: 5
I2C: ready
Clearing ALL of memory
................
DRAM: 512 MB
Testing Top 1M Area of DRAM........PASSED
Relocating code to RAM
FLASH: [16MB@e0000000][16MB@e1000000]32 MB
PCIe: Waiting for PCIe Devices...
Bus Dev Vend DevID Class Int
04 00 14e4 b580 0280 00
03 00 10b5 8111 0604 00
02 01 10b5 8532 0604 00
02 02 10b5 8532 0604 00
02 03 10b5 8532 0604 00
02 08 10b5 8532 0680 00
02 09 10b5 8532 0604 00
02 0a 10b5 8532 0604 00
09 00 1957 7011 0b20 00
02 0b 10b5 8532 0604 00
01 00 10b5 8532 0604 00
In: serial
Out: serial
Err: serial
Ser#: 1114
Diags Mem: PASSED
Diags I2C: PASSED
Diags Flash: PASSED
BootDev: Socket
I-cache enabled
D-cache enabled (write-through)
L2 cache enabled. (L2CTL: 0x20000000)
(write-through)
IPMC: v0.2.1
DOC: Turbo Mode
Net: eTSEC1, eTSEC2, eTSEC3
Core Eth Sw: VSC7376
Fat Pipe Eth Sw: BCM56580
autoboot in 1 seconds (hit 'h' to stop)
KAT4000 (Mon 1.3d)=>