Filter
Top Products
Monitor: Other Commands
10007175-02 KAT4000 User’s Manual
14-23
Definition: Set the date and time.
date [MMDDhhmm[[CC]YY][.ss]]
Display the date and time.
date
Reset the RTC device.
date reset
echo
The echo command echoes args to console.
Definition:
echo [args..]
enumpci
The enumpci command enumerates the PCIe bus (when the hardware is the PCIe Root
Complex in the system).
Definition:
enumpci
go
The go command runs an application at address addr, passing the optional argument arg to
the called application.
Definition:
go addr [arg…]
help
The help (or ?) command displays the online help. Without arguments, all commands are
displayed with a short usage message for each. To obtain more detailed information for a
specific command, enter the desired command as an argument.
Definition:
help [command …]
iminfo
The iminfo command displays the header information for an application image that is
loaded into memory at address addr. Verification of the image contents (magic number,
header, and payload checksums) are also performed.
Definition:
iminfo addr [addr …]
isdram
The isdram command displays the SDRAM configuration information (valid chip values
range from 50 to 57).