Filter
Top Products
Monitor: Environment Variables
10007175-02 KAT4000 User’s Manual
14-29
ecc_1bit_report off Select the reporting of single bit, correctable ECC errors to
the console (errors of 2 or more bits are always reported).
Valid options: on, off
enumerate on PCI bus enumeration. Valid options: on, off
ethaddr 00:80:F9:
92:00:00-
00:80:F9:
92:FF:FF
KAT4000 board Ethernet address for TSEC_1 port. The last
digits are the board serial number in hex.
eth1addr 00:80:F9:
93:00:00-
00:80:F9:
93:FF:FF
KAT4000 board Ethernet address for TSEC_2 port. The last
digits are the board serial number in hex.
eth2addr 00:80:F9:
94:00:00-
00:80:F9:
94:FF:FF
KAT4000 board Ethernet address for TSEC_3 port. The last
digits are the board serial number in hex.
eth3addr 00:80:F9:
95:00:00-
00:80:F9:
95:FF:FF
KAT4000 board Ethernet address for TSEC_4 port. The last
digits are the board serial number in hex.
ethport all Select which Ethernet port will be used for TFTP and ping.
Valid options: all, eTSEC1, eTSEC2, eTSEC3, eTSEC4
The ports are assigned as follows: eTSEC1—Ethernet debug
port, eTSEC2—Ethernet core switch, eTSEC3—Ethernet core
switch, and eTSEC4—fat pipe switch module.
fru_id undefined Corresponds to KAT4000 processing resources.
Valid options: Not defined in default configuration—
reported at bootup from the IPMC
gatewayip 0.0.0.0 Select the network gateway machine IP address.
hostname EMERSON
_KAT4000
Target hostname
icache on Enables the processor L1 instruction cache.
Valid options: on, off
ipaddr 0.0.0.0 Board IP address
l2cache on Enables the L2 cache.
Valid options: on, off
loadaddr 0x100000 Define the address to download user application code to
(used with TFTP).
logical_slot undefined ATCA chassis logical slot number of KAT4000 location. Valid
options: Not defined in default configuration—reported at
bootup from the IPMC
model KAT4000 Board model number
netmask 0.0.0.0 Board sub-network mask
Variable:
Default
Value: Description: (continued)