Filter
Top Products
Fat Pipe Switch Module: 10 GbE-10 GbE Fat Pipe Switch Module
10007175-02 KAT4000 User’s Manual
5-21
10 GBE-10 GBE FAT PIPE SWITCH MODULE
Fig. 5-15 shows how the 10 GbE-10 GbE fat pipe switch module maps to ports defined by the
AMC.0 specification; see
Fig. 1-3 for the full port mapping diagram.
Note: This fat pipe switch module option is currently not available for order.
Figure 5-15: AMC Port Map Fat Pipes Region–10 GbE-10 GbE
Fat Pipes: This region supports data path connections such as 10 GbE. It can carry large amounts of
data without significantly degrading the speed of transmission.
x4: This refers to the link width of the port (the number of lanes that can be used to intercon-
nect between two link partners).
The following diagram shows the implementation of the 10 GbE-10 GbE fat pipe switch
module on the KAT4000:
Figure 5-16: Signal Routing of the 10 GbE-10 GbE Fat Pipe Switch Module on the KAT4000
Port MappingPort #
Basic
Connector
VSC7376
Ethernet Core Switch
Layer 2
(Optional)
MPC8548
Processor
GbE*RGMII
Fat Pipe Switch Module
10 GbE-10 GbE
AMC (x4) Single Wide,
Half/Full/Extended Height
I
2
C
Fat Pipe
Local bus
PCIe (x1)
10 GbE
10 GbE
10 GbE
10 GbE
GbE
PHY
Base High Speed
Fabric A
Clock RTM I/O
(Optional)
High Speed
Fabric B
J20 Zone 3J23