Filter
Top Products
Appendix A: Serial Command Line Interface (CLI)
10007175-02 KAT4000 User’s Manual
A-17
IP Configuration
Description: Show configured IP address, mask, gateway, VLAN ID and mode.
IP Setup: Syntax:
IP Setup [ipaddress> [<ipmask> [ipgateway>]]] [<vid>]
Description: Set or show IP configuration.
[<ipaddress>]: IP address (Default: Show IP configuration).
[<ipmask>]: IP subnet mask (Default: Subnet mask for address class).
[<ipgateway>]: Default IP gateway (Default: 0.0.0.0).
[<vid>]: VLAN ID, 1-4095 (Default: 1).
IP Mode: Syntax:
IP Mode [enable|disable]
Description: Activate or deactivate the IP configuration.
[enable|disable]: Enable/disable IP (Default: Show IP mode).
IP Arp: Syntax:
IP Arp
Description: Show the current content of the ARP table.
IP Ping: Syntax:
IP Ping <ip_addr> <number_of_passes>
Description: Send one ICMP ECHO packet to the IP address provided.
<ip_addr>: IP address to ping.
<number_of_passes>: Number of passes to ping (default: 1).
Debug Commands
Debug Read Register: Syntax:
Debug Read Register <block> [<subblock>] <address>
Description: Read register address.
<block>: Block identifier, 0-7 or 0x0-0x7.
<subblock>: Sub block identifier, 0-15 or 0x0-0xf.
<address>: Register address within block, 0-255 or 0x00-0xff.
Debug Write Register: Syntax: