Filter
Top Products
Appendix A: Serial Command Line Interface (CLI)
KAT4000 User’s Manual 10007175-02
A-10
[enable|disable]: Enable/disable flow control (Default: Show flow control mode).
Port State: Syntax:
Port State [<portlist>] [enable|disable]
Description: Set or show the state for the port.
<portlist>: Port list (Default: All ports).
[enable|disable]: Enable/disable port state (Default: Show state).
Port MaxFrame: Syntax:
Port MaxFrame [<portlist>] [<framesize>|reset]
Description: Set or show the maximum frame size in bytes (including FCS) for frames
received on the port. Tagged frames are allowed to be 4 bytes longer than the maximum
frame size. Use the reset option to return to the default setting.
[<portlist>]: Port list (Default: All ports).
[<framesize>|reset]: Maximum frame size or reset to 1518 bytes (Default: Show maximum
frame size).
Port Statistics: Syntax:
Port Statistics [<portlist>] [clear]
Description: Show or clear statistics for the port.
<portlist>: Port list (Default: All ports).
[clear]: Clear port statistics (Default: Show statistics).
Port Excessive Collisions Drop:
Syntax:
Port Excessive Collisions Drop [enable|disable]
Description: Enable or disable drop of frames when excessive collisions occur in half duplex
mode.
[enable|disable]: Enable/disable frame drop (Default: Show excessive collisions drop
mode).
MAC Commands
MAC Configuration: Syntax:
MAC Configuration
Description: Show the permanently stored MAC table and the MAC aging timer.
MAC Add: Syntax: