Filter
Top Products
Appendix A: Web Interface
KAT4000 User’s Manual 10007175-02
A-18
Debug Write Register <block> <subblock> <address> <value>
Description: Write value to register address.
<block>: Block identifier, 0-7 or 0x0-0x7.
<subblock>: Sub block identifier, 0-15 or 0x0-0xf.
<address>: Register address within block, 0-255 or 0x00-0xff.
<value>: Register value, 0-4294967295 or 0x00000000-0xffffffff.
Debug PHY Read: Syntax:
Debug PHY Read <portlist> [<address>]
Description: Read PHY register for port.
<portlist>: Port list.
[<address>]: Register address, 0-31 or 0x00-0x1f (Default: Read all registers).
Debug PHY Write: Syntax:
Debug PHY Write <portlist> <address> <value>
Description: Write value to PHY register for port.
<portlist>: Port list.
<address>: Register address, 0-31 or 0x00-0x1f.
<value>: Register value to write, 0-65535 or 0x0000-0xffff.
Debug SetRegs: Syntax:
Debug SetRegs [clear | <address>] [<port_no>] [<value>]
Description: Saves user manual defined switch registers to EEPROM to make values persis-
tent, or clears/resets register values.
<address>: Register address, 0x1a or 0x1b.
<port_no>: Port number, 0-25.
<value>: Register value to be stored.
WEB INTERFACE
From the web interface it is possible to:
• Set port mode
• Enable/disable flow control
• Configure simple port-based VLANs