Filter
Top Products
Overview: Additional Information
KAT4000 User’s Manual 10007175-02
1-12
(PBDEs) and lead (Pb). Configurations that are RoHS compliant are built with lead-free sol-
der. Configurations that are 5-of-6 are built with tin-lead solder per the lead-in-solder RoHS
exemption.
To obtain a certificate of conformity (CoC) for the KAT4000 or other modules, send an e-
mail to sales@artesyncp.com or call 1-800-356-9602. Have the part number(s) (e.g.,
C000####-##) for your configuration(s) available when contacting Emerson.
Terminology and Notation
Active low signals: An active low signal is indicated with an asterisk * after the signal name.
Byte, word: Throughout this manual byte refers to 8 bits, word refers to 16 bits, and long word refers to
32 bits, double long word refers to 64 bits.
PLD: This manual uses the acronym, PLD, as a generic term for programmable logic device (also
known as FPGA, CPLD, EPLD, etc.).
Radix 2 and 16: Hexadecimal numbers end with a subscript 16 or begin with 0x. Binary numbers are shown
with a subscript 2.
Technical References
Further information on basic operation and programming of the KAT4000 components can
be found in the following documents:
Table 1-3: Technical References
Device / Interface: Document:
3
AMC/ATCA Advanced Mezzanine Card Base Specification
(PICMG
®
AMC.0 Rev. 2.0: November 15, 2006)
PCI Express and Advanced Switching on AdvancedMC
(PICMG
®
AMC.1 Rev. 1.0: January 20, 2005)
AdvancedTCA
®
Base Specification
(PICMG
®
3.0 Rev. 2.0: March 18, 2005)
Engineering Change Notice 3.0-2.0-001
(PICMG
®
3.0 Rev. 2.0: ECN 3.0-2.0-001; June 15, 2005)
AdvancedTCA
®
Ethernet/Fibre Channel for AdvancedTCA
®
Systems
(PICMG
®
3.1 Rev. 1.0: January 22, 2003)
http://www.picmg.org
CPLD MAX
®
II Device Handbook
(Altera
®
MII5V1-1.3, Preliminary; December 2004)
http://www.altera.com