Filter
Top Products
10007175-02 KAT4000 User’s Manual
12-1
Section 12
Connectors
There are multiple connectors on the KAT4000. Reference Fig. 2-1 and Fig. 2-2 for their loca-
tions. Whether individual backplane connectors are populated on the KAT4000 depends on
the specific product configuration. The backplane connectors, Zones 1 through 3, are
described in this chapter.
ZONE 1
Connector P10 provides the ATCA Zone 1 power (dual redundant -48V DC) and system
management connections. Four levels of sequential mating provide proper functionality
during live insertion or extraction.
Figure 12-1: Zone 1 Connector, P10
Table 12-1: Zone 1 Connector, P10 Pin Assignments
Pin: Signal: Insertion Sequence:
1 reserved NA
2
reserved NA
3
reserved NA
4
reserved NA
5 Hardware Address bit 0 (HA0) third
6 HA1 third
7 HA2 third
8 HA3 third
9 HA4 third
10 HA5 third
11 HA6 third
12 HA7 (odd parity bit) third